Category Archives: Welded Pipe Machine

Welded pipe machine could be used to produce square pipe, round pipe, special type pipe in speed of 90m/min. Our machine is special good about saving power, energy, workforce and others.

ZHONGTUO High Frequency welder pipe forming machine

ZHONGTUO High Frequency welder pipe forming machine

ZHONGTUO cold bending roll forming machinery factory is professional offering the high frequency welding pipe machines for making the round pipe, the square pipe and the rectangular pipe and the oval pipes.
high-frequency-welder-pipe-forming-machine
The HF welder tube forming machine is one kind of the tube forming machine, the difference is that , there is a high frequency welding system to make the tube from seam to seamless. The same with some other cold bending machine is that, the HF welder tube forming machine also can produce different sizes bu changing the molds. It can make stainless pipe, carbon steel pipe in the shape of round pipe, square pipe, rectangular tube, oval pipe and others.
high-frequency-welder-pipe-forming-machine-1

The features of the high frequency tube machine are as below:

1 High speed, the rube mill is with high frequency welding system and servo fly saw cutting system, so the speed can achieve 40 meters/min-110 meters/min
2 Can produce many shapes of pipe, can many size of each size tubes.
3 Cutting system is the servo fly saw cutting system.
One machine could be used to make various types and ranges steel pipes by changing moulds. For those who needs to run factory of steel pipe, just 3 sets of machines then you can cover steel pipe diameter range from 10-127mm within the material thickness from 0.4-5.0mm.
high-frequency-welder-pipe-forming-machine-2

The flow of the high frequency tuber forming machine is as below:

{SteelTape}→→ Single-arbor un-coiler →→Strip-head Cutter and welder→→
Spiral Accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ De-burr frame →→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table→→straightening

There are two kinds of high frequency tube forming machine,one high frequency tube forming machine is with cantilever structure, the forming rollers are on one side, and the power are o the other side. The other frequency is with Dragon Gate structure, similar to the ordinary cold bending roll forming machines.

Below are the pictures for your reference:

high-frequency-welder-pipe-forming-machine-3
The cantilever structure high frequency tube forming machine
high-frequency-welder-pipe-forming-machine-4

ZSHG50 Precise Argon-arc TIG welder tube forming machine Decorative pip

ZSHG50 Precise Argon-arc TIG welder tube forming machine Decorative pip

Argon-arc TIG welder tube forming machine is a kind roll forming machine. Take steel coil with thickness 0.3mm-1.0mm, or 1.0mm-3.00, by many steps of rollers cold bending system, to form a seam tube, then the TIG welder to form the pipe as a seamless tube.
Argon-arc TIG welder tube forming machine forming machine is designed according to the tube diameter and the thickness of the tube, the more thickness, the slower speed. The speed is about 3-12 meters/min. Comparing with the high frequency (HFI) welding pipe forming machine, this Argon-arc TIG welder tube forming machine is much cheaper in cost.

TIG-welder-tube-forming-machine

This Argon-arc TIG welder tube forming machine is formed by : Unfolding Strip→Branding→Forming→Welding→Grinding→Sizing→Straightening→ Length fixing→Cutting→Unloading
The Argon-arc TIG welder tube forming machine is newly designed based on practical producing and acquiring the advantages of equipment home and abroad,which is also convenient in operation and maintenance.

HFI Pipe making machine
Below is some specifications of the ZSHG50 Precise pipe forming machine:

4.Finished stainless steel tube specifications:
For Round tube: Φ19.05—Φ76.2 mm Thickness: 0.4—4mm
For square tube: 15×15—60x60mm Thickness: 0.4—4mm
For rectangle tube: 15×15—40x80mm Thickness: 0.4—4mm
Tube Length: 4m—10m
5.Production speed for the stainless steel tube: 0.5—7m/min
6. Land for installation: 24mx1.2mx1.4m (L x W x H)
7. Workers required: 1 person can operate 2 sets of this Tube Mill.
8.Voltage: 415V/ 420V/ 440V
9.Process flow:

1.General Introduction:
ZSHG50 Tube Mill is designed to produce SS welded round tubes of Ф19.05—Ф76.2mm in diameter and 0.4—4mm in wall thickness, with the characters of advance, steady, perfect and maturity etc. The mill line is newly designed based on practical producing and acquiring the advantages of equipments home and abroad,which is also convenient in operation and maintenance.
2. Main Technical Parameters:
2.1 Material of the coils: Stainless steel
Strip Width: 59–240mm
Strip Thickness: 0.4–4mm
Coil Weight: ≤3T
2.2 Finished Product Range:
Diameter of round tube: Ф19.05–Ф76.2mm

2.3 Wall thickness of finished tube: Round: 0.4–4mm
2.4 Length of finished tube: 4–10m
2.5 Fixed
2.6 Forming Speed: 1–8m/min

(1) Feeding guide bracket: 2 groups; Clean linking device: 1 pcs
(2) Vertical stand: 6 groups, material: 40Cr; the tempering high-frequency quenching fine grinding chrome plated processing. Material for shelf: HT200
(3) Horizontal shaft: material:40Cr diameter of axle: 50mm
(4) Vertical shaft: material:40Cr diameter of axle: 35mm
(5) Horizontal stand: 7 groups; 40Cr; the tempering high-frequency quenching fine grinding chrome plated processing
Material for shelf: HT200
(6) Slow wave box transmission system: 1 set
(7) Driving motor: 1 piece
(8) Machine base: 1 set
(9) The universal shafts connection (Chuanxin Groups)
(10) Grinding shaft: material: 40Cr

We also have the High Accuracy Galvanized Steel Weld Pipe Roll Forming Machine if you want to know about this steel welde pipe roll forming machine or TIG welder tube forming machine Decorative pip you can contact us with Email roofingmachine@zhongtuocn.com