Double layer Roofing Sheet Cold Roll Forming Machine

Double layer Roofing Sheet Cold Roll Forming Machine is a combo machine for making many different types roofing panels. For example when you need to make two types roofing sheets, you have to buy two types machines. But one double layer machines, by one machine you can produce those two types. For example the first layer could be glazed tile roll forming machine and the second layer could be IBR or round wave roofing sheet,

Working process of double layer roofing machine:

Uncoiling Feeding material into machine Roll forming Measuring length—– Step formed—–Auto cutting Products receiving

double layer roofing sheet cold roll forming machine

Double layer roofing machine picture:

double layer roofing sheet cold roll forming machines

Basic parameters of the double layer roofing machine:

No. Main parameter
1 Length of the main part About 8500 1650 1500 mm
2 Weight of main part About 7.5 t
3 Voltage 380 V/50 HZ 3 Phase (as customer’s request)
4 Roller fixer Middle plate welded
5 Frame 350 H steel welded
6 Frame thickness 16 mm
7 Drive mode Chain
8 Material of rollers 45# steel, surface hard chromium plating.
9 Material of shafts 45# steel
10 Diameter of shafts 90 mm
11 Number of rollers Up layer: 13 rollers

Down layer: 15 rollers

14 Main power 7.5 kw

Features of double layer roofing machine:

1.One machine could produce two types roofing sheets.
2.Save working space, save energy and save cost of machine.
3.Easy to use and easy to transportation.
4.If you need to add wheels to machine, you can put production aany place.
5.Two layer one PLC control system, one pair of motors, easy to maintain.
6.Working speed 25 meter per minute.
7.Material thickness could be from 0.2 to 1.2mm.
Note: But two layers cannot work at the same time. If you need to huge production, please buy single layer machine.

Here is the machine working video for your reference:

Leave a Reply

Your email address will not be published.