1100 glazed tile press production

1100 glazed tile press products with light weight, high strength, major, good shock resistance, are widely used in high – rise steel construction.
Glazed tile press is divided into three parts, forming part of the roller, pressure-type part, cutter part.
Roller forming part of the drag from the motor, chain driven rollers rotate. Pressure-type part is moved up and down driven by a hydraulic cylinder mold, can be colored steel into many sections, the shape of glazed tile. Cutter tool part is moved up and down driven by a hydraulic cylinder, can be colored steel Waqie off.
1100 glazed tile press production process is as follows: color steel roller into the molded part after molding to-pressure part, pressed into an equidistant one, the cutter is responsible for cutting to length.

1100 glazed tile press production
Before 1100 glazed tile press used to check the connection is solid throughout, mounting bolts, tighten the nut if, within the left and right chassis lubrication should add a little oil to power-up test machine, first empty running careful observation, with or without vibration, noise, oil window is to oil, whether coordinated motion components, can be installed after all normal mold, mold installation, must be cut off, by hand moving belt or gear motor, so that the table indexing, and the carriage rises to the highest point, the best use of an object supported between the table and the bottom surface of the carriage, to prevent slipping seat natural fall, causing the accident.
Die 1100 glazed tile press used for an upper mold and a lower mold six same size specifications, install upper and a lower mold, the lower mold mounted directly on the six-party table runner, mounted on the upper mold carriage a bottom surface, and place the appropriate thickness of the plate to ensure that the upper and lower mold clamping after four surrounding space uniform, the distance between the upper and lower mold equal to the thickness of the tiles required. Then prevail over mold, table indexing, install the remaining five pay lower die, to drive it all the upper and lower molds were installed after the press shoe.
Roller forming part of the drag from the motor, chain driven rollers rotate. Pressure-type part is moved up and down driven by a hydraulic cylinder mold, can be colored steel into many sections, the shape of glazed tile. Cutter tool part is moved up and down driven by a hydraulic cylinder, can be colored steel Waqie off.
1100 glazed tile machine equipment products with light weight, high strength, major, good shock resistance, are widely used in high – rise steel construction.