Metal Shaped Steel Sheet Cold Forming Machine
Metal Shaped Steel Sheet Cold Forming Machine Introduction
The two models are the perfect combination, reasonable structure, beautiful appearance. Saving space, easy operation, especially suitable for small place and spot construction
This machine is consist of ingress feeding part, main forming part, forming shearing device, hydraulic station, computer control system and so on
Upper and down layer is converted easily, button on electrical box control upper and down layer respectively. Power is controlled by clutch
Optional device is normal material-feeding machine. Hydraulic material-feeding machine
Upper and down model can be customed as customer requirement
Metal Shaped Steel Sheet Cold Forming Machine Working process
Uncoiling–Feeding material into machine–Roll forming–Measuring length–Auto cutting–Products receiving
Machine parameter
| Material Width | 1200mm | ||
| Effctive width | 1050mm/1080mm | ||
| Thicknes | 0.3-0.6mm | ||
| Size | 6500mm*1400mm*1300mm | ||
| Main Frame | 300H steel | ||
| Chain | 0.6 inch | ||
| Weight | about 3.5 tons | ||
| Diameter of shaft | 70,45#steel | ||
| Material of roller | 45#steel | ||
| Number of rollers | 1050 :11 stand rollers | ||
| 1080: 9 stand rollers | |||
| Main motor power | 3.0kw | ||
| Hydraulic station | 3.0kw | ||
| Control system | PLC computer controller | ||
| Speed | 6-12m/min |