The new color steel roll forming machine design

About the roll forming machine design had finished.And the now color steel roll forming machine have send to the Customer. Now i will introduct the design about roll forming machine.This roll forming machine have two part is motor reducer drive and chain transmission.

The last have some Parameters about the machine.But the parameters can be Designation.We can also customize the machine according to your requirements

                         Equipment and Qty.
Decoiler 1 set
Main roll forming machine 1 set
PLC control station 1 set
Hydraulic station 1 set
Post cut 1 set
Electric motor 1 set
Runout table 1 set

Main features of each part
Processing material: Galvanized Coil, PPGI Coil.
Material thickness: 0.35- 1.0 mm
Material hardness: 350 mpa
Material width:1020 mm
Feeding width: 1200 mm
Forming speed: 12 m/min
Uncoiler System
Usage: It is used to support the steel coil and uncoil it in a turntable way.
Loading capacity:5 T
Uncoiling width:1200 mm
Inner diameter: 450-550 mm
Entry Beach
Usage: Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
Main Roll Forming System
Size of the main part: about
8500 Ñ… 1650 Ñ… 1500
Weight of main part: 5. 5 tons
Voltage: 380 V/50 HZ 3 Phase or as your required
Roller fixer : middle plate
Frame : 350 mm H beam steel welded
Drive mode: case of differential
Material of rollers: 45# steel, surface hard chromium plating.
Material of shafts: 45# steel
Diameter of shafts: φ 80 mm
Number of rollers : 17 rollers
Main power: 7.5 kw

roll forming machine design
Shearing Mechanism
Feature : Ensure stability, precision and cutting speed
Function : Automatic cutting controlled by PLC
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12 quenched
Power supply : hydraulic power
Components: It contains one set of blade, one hydraulic tank and one cutter machine.
Hydraulic Station
It is controlled by gear pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job
Power: 4 kw
Hydraulic oil: 46#
Components: The system includes a set of hydraulic tank, a set of hydraulic oil pump, 2 hydraulic pipes. And 1 sets of electromagnetism valves.
Electric Control System
1.Adopted PLC, frequency converter, Delta from Taiwan to ensure high speed with stability, precision and lifetime.
If you need, we can change it other brand or little computer type for touching screen.

roll forming machine design

One counter gauges length, pulses, and decides length.
Omron encoder for length measurement
1.Easy damaged parts: conk 2 pcs, fuse-link 4 pcs
2. Rubber mat 1 pcs;
3.Bolt spanner 1 pcs

Payment terms
Payment: 30% T/T in advance and balance 70% after inspection confirmation before shipment.
Delivery:within 45 working days after receipt of deposit.
1. Two years guarantee, and we will provide the technical support for the whole life.
2. Training time: one week (contains the time of installation and adjustment)

that’s some parameters about the machine.If you have another demand we also can give you anothe roll forming machine design.

We also have another machine such as JCH roll forming machine,Glazed tile roll forming machine,Kell roll forming machine ,roof panel roll forming machie and so one.If you need you can tell us.We can give you the roll forming machine design about the different machine.