Roof Tile Roll Forming Machine
We take immense pride to introduce our company as one of the truthful manufacturers and exporters of Roof Tile Roll Forming Machine. A wide gamut of these machines is Producing by us by implementing world class quality. we are offering you to this Roof tile roll forming machine in as per your requirement. Our Roll Forming Machine is widely appreciated by the customer all around the world due to smooth and constantaly performance. Further, this Roof Tile Roll Forming Machine is Mostly used for manufacturing steel sheets that are used for the roofsof buildings.
D coiler 5 ton cap.
Entry Gate with
Roll Forming Line with 18 station , 10 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)
Maximum sheet width that can be formed : 1450 mm
Maximum sheet thickness in CRCA Strips that can be formed : 0.5 mm
Horizontal distance between shafts : 500mm
Number of forming stations : 18 nos.
Total HP for Line : 15
Speed of the machine : 10 -14 mt / minute
Size of machine : 9500 x 1700 x 1100 mm
Coil weight : 5 MT Max
Coil width : 1450 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
Entry gate will be provided for movement of sheet to roll former.
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.
Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.
The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor
One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.
Cutting Unit (Hydro)
Hydraulically operated power pack along with cutting die with 3 HP electrical.