Roofing Panel Manufacturer Roll Forming Machine Feature:

The product formed by this roll forming machines looks beautiful and widely used as the roof of garden, factory, hotel, exhibition center,etc
Raw Material:
1. Material: Pre-painted steel coil & galvanized coils
2. Yield strength: 235Mpa
3. Thickness: 0.3-0.7mm
Machine components:
Decoiler (manual decoiler and hydraulic decoiler for option) 1 set
Feeding & guiding device 1 set
Main roll forming machine 1 set
Hydraulic cutting system 1 set
Controlling system 1 set
Run out table (auto. Stacker for option) 2 pcs
Components spec.:
1. Decoiler Max. Capacity: 5000kgs
2. Hydraulic station power: About 2.2Kw (Depend on final design)
3. Control system: Mitsubishi PLC with touch screen
4. Cutting length: Cut-to-length
Machine spec.
1. Size: about 9*1.4*1.5m (L*W*H)
2. Weight: About 6.5ton
3. Color: Make-to-order
4. Forming Speed: 15m/min.
5. Power : 380V/3Phase/ 50Hz
6. Main motor power: 7.5Kw(Depend on final design)
Packing:
1. One 40feet container for loading one set machine with mechanical decoiler.
2. Main machine body and decoiler is load naked (tighten to container with steel wire rope).
3. Spare parts and operating tools are loading in tooling box.
Delivery : about 50 days

Roofing Panel Manufacturer Roll Forming Machine

                                         Roofing Panel Manufacturer Roll Forming Machine
Technical parameter
ItemSpecification
Raw MaterialTypePre-painted steel coil & galvanized coils
Thickness(mm)0.3-0.7
Yield strength(mpa)235-550
Roller material45# steel , coated with Chrome
Shaft for rollersSolid shaft with 72mm,processed with cylindrical grinder
Forming speed(m/min)About 15
Output speed(m/min)About 12 for 6m length sheet
Speed adjusting modeMitsubishi frequency transformer
Roller driveDecelerating motor + Chain drive
Cutting modeHydraulic cutting
Cutter materialCr12 mould steel
Length measurementNemicon Encoder
Control modeMitsubishi PLC
Operating modeButton + Mitsubishi Touch screen
Main motor power(kw)7.5KW
Total power(kw)9.9 KW
Process flow
Decoiler — Feeding & Guiding — Roll forming—Hydraulic Cutting – product to run out table
Components of machine
Decoiler (manual decoiler and hydraulic decoiler for option)1set
Feeding & guiding device1set
Main roll forming machine1set
Hydraulic cutting system1set
Controlling system1set
Run out table (auto. Stacker for option)1set