The machine working speed could reach 26m/min within the material thickness 0.4-0.8mm. Different with other cold roll forming machines, ours put quality at the first place. Normally speaking, our machine could use more than 10 year without any problem.
For making what kind of U channel, we will customize according to customer requirement, including machine power size and others also could be customized according to customer needs.
Where the U channel could be used for:
- Use the U channel for the main light keel when ceiling making.
- For interior wall building, this is made for making a big room into more small rooms.
- Normally speaking U channel or metal track will be used together with C stud as cross light keel.
- Compared with wood keel, metal U channel has advantage of light weight, easy to install, durable and others.
Here are some machine parameters for your reference:
|Here are some machine basic parameters for your reference|
|Raw material||Processing material: GI|
Material thickness: 0.4—0.8mm
Material hardness:550 MPA—350 MPA
Formed width: 65mm
Forming speed: 20m/min
|Main machine information size and weight||Length of the main part: 3300х800х1400mm|
Weight of main part: 3 tons
|Voltage||Voltage : 380V/50HZ3Phase (as customer’s request)|
|Roller fixer||Guide column|
|Frame||middle plate welded, memorial arch frame type|
|Drive mode||gear box|
|Material of rollers||GCr12MoV|
|Material of shafts||45# steel with tempering|
|Diameter of shafts||φ40mm|
|Number of rollers||10 rollers|
|Cyclical planetary gear speed reducer）|
|Noted: different sizes will be produced by adjusting the spacers by hand.|
|Main elements of the machine|
|Main roll forming machine||1 set|
|Punching machine||1 set|
|Flying track cutting saw||1set|
|Computer for PLC station||1 set|
|Hydraulic Station||1 set|
|Runout table||1 set|
Related Light keels, all those types we also customize machine for you: